Tap of the World: Components of a Draft Beer System

A great way to start your weekend is by having the perfect pint of your favorite beer. To make that experience even better, people have developed a system that amplifies the flavor!

Getting the highest quality drink is now easier because of the draft beer system design in San Antonio, TX. Read on to learn the different components that maximize the flavor.

Tank

This is also known as compressed gas cylinders or bottles. It’s usually made of aluminum and contains CO2 gas. A 5-pound tank can dispense 5 to 7 kegs or containers, while a 10-pounder can produce at least ten kegs.

Regulator

This component is connected to the tank and ensures that the brew is being dispensed with the appropriate gas pressure. Most have a screw that's used to set the pressure outlet. To allow more pressure, rotate the screw clockwise, and counter-clockwise to reduce it.

Gas Line

This is a long tube that connects the regulator to the keg coupler. It has a 5/16-inch inner dimension and requires a clamp on both ends to prevent the pressurized gas from escaping, which can cause beer leakage.

Keg Coupler

This is the heart of every beer system design draft in San Antonio, TX. It’s attached to the keg's valve and is located between the gas and the beer line. This piece allows a smooth flow by using the pressurized gas that enters the container to draw out the drink.

Keg

It's a barrel made of stainless steel that's used to contain the beer. It's usually filled by the brewery and keeps the beverage as fresh as possible by protecting it from light and air. This is what the coupler is connected to.

Beer Line

From the name itself, this is the tube that your beverage runs through. It's connected to the keg coupler. This is made of food-grade plastic or a brewery-approved vinyl hose and has an inner diameter of 3/16 inches.

Faucet

The draft beer faucet is often referred to as the tap. This is the last component in the system where your drink is dispensed from. Its main purpose is to direct the flow and make the perfect pour. The materials used for it are usually stainless steel or chrome-plated brass.

Now that you've learned the different parts, you have a broader understanding and appreciation for all the work that goes into making your favorite draft. If you want to have this system installed in your kitchen, you can contact a person who specializes in a draft beer system design in San Antonio TX.